data imr reloading
data imr reloading- The powder charge weights specified represent
loads that developed Maximum Allowable Chamber Pressures with the test barrels
used and components specified, with the exception of loads that are specified
as (C) compressed charges which may represent case capacity rather than maximum
chamber pressure. All tests were conducted utilizing commercial barrels in a
Universal Receiver. It is not unusual for reloads assembled with particular
components and fired in the individual reloader's gun to give ballistic results
(particularly chamber pressures) that vary in either direction from the published
data. To compensate for any component and/or gun combination that would tend
to yield pressures in excess of the published data, it is recommended that the
powder charge be reduced 10% initially. (This reduction in powder charge weight
should also be made each time that any of the components in the load are changed.)
After firing several loads at the lower powder ch
It
will be the most ADVANCED and POWERFUL Ballistics Software ever created!
It is currently being written and will be sold by US-Lasers, Inc.
The name
of this new program is:





Get
the Latest Information About
TOTALLY BALLISTIC
The Ultimate Ballistics Software
Click
Here for the latest
information about TOTALLY BALLISTIC